NIPPON PAINT EA4 FINISH (EP) is a two-pack polyamide cured epoxy finish for use on primed steel surface where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below.
Product Features:
- Good resistance to abrasion and mechanical damage
- Excellent on correctly prepared and primed surfaces
- Dry service temperature up to 100°C
Scroll for more colours
Coating System
Application
Coating System
Steel | ||
---|---|---|
Type | Product Name | No. of Coat(s) |
Primer/Sealer | Nippon Paint 8048 Zinc Phosphate Primer QD | 1 coat |
Undercoat | Nippon Paint 8048 | 1 coat |
Topcoat | Nippon Paint EA4 Finish (EP) | 1 coat |
Application Data
Application | Brush, Roller, Airless Spray, Compressed Air Spray |
Thinning | Thin up to 10% by volume of SA-65 Thinner |
Touch Dry/ Hard Dry | 2 - 3 hours / 16 hours |
Recoating Interval | Minimum 16 hours |
No. of Coat(s) | 1 - 3 coats |
Theoretical Coverage | 6.4 - 10.2 m² per liter per coat |